Do you think that 20 amp breaker will work with the Orion? No specs
(that I've found) on the current consumption of the Orion at max power
out, but the PS they are selling with it is rated at 25 amps.
Tom/W4BQF
calderman AT cox.net
I put mine in series with the 12 volt line running directly to the final
board. It is a 20 amp breaker and this way the current to the receiver
is
not involved. Also, if it trips, the pegasus does not loose its mind!
Carl Moreschi N4PY
Franklinton, NC
ilman/listinfo/tentec
|