Hi, Jan,
For 6.3 MHz I have all the filters, but for cw, 95% of the time I use
2.4 kHz or 500 Hz. I use the 250 Hz on occasion when conditions are
really bad. I used to use 250 Hz a lot when I had a lot of 2RN traffic
to copy in the winter. Its good for one-on-one, but a a little too
narrow for nets because not everyone is zero beat. The 1.8 can be
considered as a wide cw filter but is really most useful as a narrow SSB
filter. If you have a good filter in the first IF, the PBT will work
really well, too.
73,
Bwana Bob
Jan Scheuerman wrote:
>
> Hello list ..
> I have an Omni VI Plus that only has the 500 Hz filter for CW. I'd like
> to get the 250 Hz for CW and the 2.4 kHz for SSB. Hopefully, someone on
> this list will have one or both of them for sale.
>
> Also, which optional filters would be recommended for 6.3 MHz IF for a
> 90 percent CW operator? I'm not really up on this and need some expert
> advice. Any help with this will be greatly appreciated.
>
> Thanks and 73...
> Jan WA2YL
> --
> Jan Scheuerman, WA2YL <wa2yl@arrl.net> or <ylham@earthlink.net>
> Home Page: http://www.wa2yl.com
> -
> Exercise daily. Walk with the Lord!
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
|