[TenTec] Corsair Jumper

["Paul DeWitte K9OT" <k9ot@mhtc.net>]

Tim what Carl said also happened to me. I had an Omni V and used the jumper
that was with it and the pins were too short. I used some plugs with longer
pins and everything was fine. That is probably what is the problem with your
Corsair II as you need either the VFO or a jumper to make it work.
As a happy Corsair II owner I dont see how a CW op could not like a Corsair
II, but that is personal opinion only.
Good luck 73 Paul K9OT