Dave,
What does the asterisk after the heat sink temperatures represent?
73..de John/K4WJ
At 03:57 PM 12/11/02 -0500, Dave Bowker wrote:
Here is some data that may shed light on the discussion dealing with 962 PS
heatsink tempeature. These tests were performed on an OMNI-VI Option 3 and
961 power supply today.
73, Dave, K1FK
Fort Kent, ME
~~~~~~~~~~~
NOTE: The VI Option 3 has the Ovenaire MC43-1G crystal oven master
oscillator which is NOT powered up during times that the 961 PS is ON and
the VI is OFF (Early production OMNI VI+ radios before the TCXO was
incorporated maintained power to the oven when the VI+ POWER switch was in
the OFF state).
Temperature and AC current data taken with B&K Precision Model 390 DVM with
Type K thermocouple probe attached to 961 heat sink at top of fin adjacent
to Q1. The VI was in the transmit mode for 10 minutes at 100 watts output
into a dummy load, at which time the temperature stabilized at the reading
indicated. Output power was monitored with a Bird 43 wattmeter, 250 watt
3-30 MHz slug and with 0% reflected power from a Bird #8141 dummy load.
Relative humidity for all meaasurements was 35%.
Test Parameter 961 Input (amps) 961 HS Temp
961 OFF (ambient) 0.00 16.0* C
961 ON/VI OFF 0.30 20.0* C
961 ON/VI Recv 0.62 27.0* C
961 ON/VI Xmit 3.35 61.5* C
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
73..de John/K4WJ
***********************************************************
John/K4WJ in Pembroke Pines, FL
QTH 26 00 51 N
80 16 16 W
K8PXG from 18 Jun 59 to 11 Feb 97
K8WJ from 12 Feb 97 to 07 Apr 97
ZF2HZ from 17 May 84 to 31 Dec 84
***********************************************************
|