I have an interesting problem I'm hoping someone has come across. I have an
Omni V.9 and operate mostly CW and a little SSB on 20 meters
and above.
I checked into a 75 meter net this morning at 3925.00 and found everyone to be
at 3924.80. No problem. Then everyone said I was off frequency on the low side.
I ended up setting a split and when transmitting at 3925 everyone said I was
dead on. So I use the calibration feature and calibrate the receive so everyone
else is on 3925. You guessed it....when transmitting simplex on the "new" 3925
I was too low again. Ok. Went up to 17 meters and called CQ and was answered
dead on frequency. My contact confirmed I was on 18140....just as I thought.
I'm wondering if its an LSB problem at this point. I've worked a few DX
stations in the past couple days on 10 and 15 SSB so I think I'm ok on those
bands. Haven't had any luck on 40 this morning but all my CW calls have been
answered and the CW is LSB...
Any ideas?
Andy W1AWB
a7bull@hotmail.com
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
---
|