First of all Ditto to Chris' comments regarding Yahoo. I don't
understand the reason for segmenting the group and I especially
don't understand why anyone would want to "join" a Yahoo
discussion group.
OK, confession time. I've had my 'V two days now and have been
silent here. Shame on me. I'm sorry! :-) Actually, I wanted
to use it some before I make comments. I find that perceived
deficiencies often are the result of a lack of knowledge in the
operation of a piece of equipment or software. But, since there
is nothing here yet on the 'V, here goes.
First impression - small and neat. Somehow the published
dimensions didn't prepare me for the actual device. This will
make a really nice "grab-n-go" radio.
WOW! what a heat sink! I would not be surprised to find that
the heat sink has more surface area than the heat sink on my
Argosy which runs 50 watts as you know. I'm still going to ask
Santa for a fan assembly though for those digital modes.
Next impression - the manual is something to behold! The
Pegasus manual is basic, the Jupiter manual is pretty good, the
Argonaut manual is wonderful! Lots of operational stuff but
what is surprising is the amount of technical information about
the radio. And tons of schematics. Someone ask if there are
complete specs on the rig? YES. The manual has two pages of
specs.
OK, how does it work you ask? Well, so far I am quite pleased.
I have it sitting beside a Jupiter for the moment and can do
some A/B comparisons. Although I have not had enough seat
time form a detailed impression, what little bit of operating and
listening I've done leaves me with a good impression. CW works
very nicely, as one would expect of Ten Tec. Virtually perfect
shaping.....no key clicks I bet, and seamless break-in. I've also
had good reports on sideband.
On SSB, after working with it for a while I got rid of the
supplied mic and put on a Shure 444. That was the first big
improvement. I've been playing with the speech processing but
cannot say anything for sure about how well it does or does not
work yet. I need to make a better monitoring arrangement
before I say anything. For now I use the radio with the SP off
and the mic gain at 50% with the Shure. Everyone tells me I
have a nice signal.
Controls - this is an area where you do need to study the manual
a little bit. You can put the rig on the air without cracking the
book but there are lots of features that you can only find by
reading the manual. I like the arrangement of linking the menu
selections of a particular feature to the button that selects that
feature. Take the keyer for instance. First push of the KEYR
button selects "off/speed". Next push selects sidetone
frequency, [more about this in a minute] next push selects
sidetone volume and next push selects weighting. I like this
layout. So it goes with VOX and some other features as well.
CW Spotting - at first I was disappointed that there is no
spotting function. I have a hearing problem that makes it
difficult to get right on frequency by ear only. Then I thought
about using the sidetone setting option. Works like a champ!
Here's how it goes. Select KEYR and sidetone frequency. Let's
say it is set at 700 hZ. You will hear the sidetone . Now, tune
the CW signal with the main tuning until you hear a beat between
the tuned signal and the sidetone. Lower the beat to as close to
zero as you can get and you are on frequency. Hit KEYR again as
needed to exit and you are set go.
This is getting to be pretty long. More later when I have a
better feel for how the radio is doing.
Let's hear from some other 'V users.
-73-
-Lee-
On 19 Oct 2002 at 8:21, Chris Robson wrote:
> I for one would like to hear about the new Argonaut, however from past
> experiences, I won't partake in any listserve on Yahoo. Let's keep Ten
> Tec stuff here where you don't need a special handshake or a
> membership or the like. This list is well served and maintained. It
> has good insightful feedback and I don't have to be HTMLed to death.
> This is only my opinion, if others wish to stray so be it.
>
> 73, Chris KB3A
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
|