If you blow the finals in an Argosy, you're in trouble. Ten-Tec can get
them (you probably can, too) but it takes a while and they are expensive.
Mike
----- Original Message -----
From: "Shawn Upton" <kb1ckt@yahoo.com>
To: "Scanandoah, Alan" <ascanand@harris.com>; "'HGLENT'"
<hglent@ix.netcom.com>
Cc: <tentec@contesting.com>
Sent: Tuesday, October 08, 2002 1:34 PM
Subject: RE: [TenTec] Argosy
Thanks to all for the help. I might just go with the
AADE DFD3 (or similar) and mount the counter outside
of the Argosy.
Oh yeah, just off the top of my head--are the finals
for the Argosy the ones that are hard to find, or
relatively common? If I recall correctly, MRF475's
(or ???) are long gone, and I'm curious as to what to
expect if I blow the finals. Not that I plan to,
but...
KB1CKT
--- "Scanandoah, Alan" <ascanand@harris.com> wrote:
> The article is even closer than that:
> http://www.qsl.net/tentec/mods/525mods.htm
>
> Al, K2ZN
> -----Original Message-----
> From: HGLENT [mailto:hglent@ix.netcom.com]
> Sent: Tuesday, October 08, 2002 10:10 AM
> To: kb1ckt@yahoo.com
> Cc: tentec@contesting.com
> Subject: [TenTec] Argosy
>
>
> Shawn,
> everything you ever wanted to know about Argosy up
> grades is in an
> article from, Ham Radio, November, 1986, Page
> 38, Published by CQ
> Communications Inc.
>
> So, off you go to the library to find the article...
|