Methinks you have some RF floating around the shack -- I can duplicate that
sort of behavior on 15 meters or higher frequencies when I don't have the
rig properly grounded. The Jupiter's control is very sensitive to RF in the
shack.
Good luck!
73,
Joe, W2RBA
> -----Original Message-----
> From: tentec-admin@contesting.com [mailto:tentec-admin@contesting.com]On
> Behalf Of J. Duffy Beischel
> Sent: Saturday, September 21, 2002 10:57 AM
> To: tentec@contesting.com
> Subject: [TenTec] Jupiter Issue
>
>
> I installed 1.23 of the firmware and have a new, but very strange problem.
>
> I am using an LDG AT 11MP autotuner with the Jupiter. When on 15
> meters, and this only happens on 15 meters, if I press the tune button
> on the Jupiter, the rig immediately changes frequency to somewhere
> between 20 and 22 Mhz. I have tried all other bands and everything
> works fine on those bands. Anyone else experience this?
>
|