Thats right...they are the two center pins.
Gary
AA2IZ
----- Original Message -----
From: "Mike Hyder -N4NT-" <N4NT@charter.net>
To: <kitt5@earthlink.net>; <TenTec@contesting.com>
Sent: Saturday, July 27, 2002 4:34 PM
Subject: Re: [TenTec] Help w/252M ps
> Two of the wires from the power supply are for the AC line. They enable
the
> supply to be switched from the rig. To use the supply with another rig,
> they must be jumpered. I believe they are white wires and think they are
> the two center pins. They are not the black and red wires.
>
> Mike N4NT
>
> ----- Original Message -----
> From: "Jerry Kitterman" <kitt5@earthlink.net>
> To: <TenTec@contesting.com>
> Sent: Saturday, July 27, 2002 4:00 PM
> Subject: [TenTec] Help w/252M ps
>
>
> |
> | Gang,
> |
> | I have a 252M pwr sply that I need to temporarily use with another
rig
> | (not TT) and I want to know if this is possible? Do I just connect the
> rig
> | to the ps and use the on/off switch on the ps? I did try this but no go
> | although the connector to the ps may not have been making good contact.
> TIA
> | for help.
> |
> | 73
> | Jerry..W9CTB
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
|