I have had more help than I could imagine. Thanks to all of you who
responded to my cry for help, I have the Omni VI running like I want it to
now. Your guys are great!!!
Now on to discovering the rest of the goodies this rig has to offer!
Steve NU0P
----- Original Message -----
From: "Peter G. Juliano" <jessystems@waypt.com>
To: "Steve" <sswhite@mchsi.com>
Sent: Saturday, July 27, 2002 9:42 AM
Subject: Re: [TenTec] New Omni VI+ Owner is Lost!
> Hi Steve,
>
> Here is how to adjust the intensity.
>
> The LOCK button has two functions--one to lock the dial and the second is
to
> access the menu.
>
> Press and hold the lock button for about two seconds. The display will
> present the word " CHOOSE". There are three choices 1,2 or 3 which
> accordingly present three different menus. Choosing "1" will enable you to
> make adjustments including the display intensity, clock mode, audio
> annunciator and the activating the linear control relay. "2" has to do
with
> the communications port and the mode of the built in keyer, "3" has to do
> with how you can directly enter frequencies and offset displays.
>
> OK so lets us assume you selected "1" Once you have selected this option
use
> the main tuning knob to go through the various selections. The sub menu
for
> display intensity is " INt". Once you are on the "INt" sub menu use the UP
> and DOWN Arrow keys to raise or lower--a numeric display on the readout
> panel will tell you where you are--for intensity the level goes from 0 to
> 15.
>
> TO EXIT the menu mode PRESS the LOCK BUTTON twice.
>
> You really need to get what is called "Manual Addendum Option 3 Upgrade
for
> the Omni VI, Model 563". I don't have a scanner otherwise I would scan it
> for you.
>
> 73's
> Pete W6JFR
>
|