I am writing software to control the RX340. According to the RX340 =
manual, configuration switch S1-5 sets the serial byte length to 7 or 8. =
However, it seems that the byte length is always 8 regardless of the =
setting, or at least my program needs to be set to 8 to work.
Has anyone else noticed this? Admittedly, this is the first time I have =
ever tried to use 7 bit bytes, so I don't know if my serial port =
routines work properly with 7 bits.
I also tried using the Windows HyperTerminal program. It seeemed to work =
at either 7 or 8 bit settings regardless of the S1-5 setting.
73,
Mark
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
---
|