Oh, I see.
22 (new band xtal)
+5 (pto)
=27 ('VFO Mix')
27 (above 'VFO Mix')
-9 (carrier oscillator)
= 18 MHz (operating frequency)
Now to the tuned circuits. . .
73, Mike N4NT
----- Original Message -----
From: "Mike Hyder -N4NT-" <N4NT@chartertn.net>
To: <geraldj@isunet.net>
Cc: "Ten-Tec @ Contesting. Com" <tentec@contesting.com>
Sent: Wednesday, June 19, 2002 10:28 AM
Subject: Re: [TenTec] Adding band to Omni D Series B
> Please 'splain the mix scheme with a 22 MHz crystal.
>
> 73, Mike N4NT
>
> ----- Original Message -----
> From: "Dr. Gerald N. Johnson, electrical engineer" <geraldj@isunet.net>
> To: "Ken & Linda Burrough" <w8keb@1st.net>
> Cc: "Ten-Tec @ Contesting. Com" <tentec@contesting.com>
> Sent: Wednesday, June 19, 2002 9:07 AM
> Subject: Re: [TenTec] Adding band to Omni D Series B
>
>
> > Depends on what the crystal and tuned circuits are. If the crystal added
> > is 4.0 MHz give or take a couple KHZ, there's going to be that strong
> > transmit spur. If the crystal is 22 MHz, its clean. Another check. If
> > set for USB on 20m and it receives upper on 17 meters, its going to have
> > the spur, if it receives LSB in the normal sideband position, its clean.
> >
> > 73, Jerry, K0CQ
>
>
|