Re: [TenTec] PTO rebuild

["Stuart Rohre" <rohre@arlut.utexas.edu>]

In the interests or regreasing only once, I use Dow Corning 44 high
temperature ball bearing grease for such applications.
I would think isopropyl alcohol should cut the old grease, and a toot brush
might be useful for helping clean out the grooves.

I avoid using WD 40 as its residue attracts dust and becomes gummy with
time.  Even after alcohol, I would use a lint free wiper to remove any
residue before regreasing.
73,
Stuart K5KVH