To: | <tentec@contesting.com> |
---|---|
Subject: | [TenTec] Re: Low voltage - engine off |
From: | fred toth" <fctoth@attglobal.net (fred toth) |
Date: | Sun, 31 Mar 2002 09:31:44 -0800 |
>The Delta II needs 13volts or more. Lower than that the radio will sound distorted when transmitting as stated below.> 13 volts seems high, based on my experience. I have used a Delta II in my car for mobile CW for six years, with great success. The keying starts to break down when the key-down voltage falls below 12 volts. You might try measuring the key-down voltage at the rig to help you determine possible cures (heavier guage wire between battery and rig, bigger battery, etc.) |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [TenTec] Omni V Interfacing, Rick Tyler |
---|---|
Next by Date: | [TenTec] Omni V, Tim Vandagriff |
Previous by Thread: | [TenTec] Re: Low voltage - engine off, John L Merrill |
Next by Thread: | [TenTec] Omni V Interfacing, Rick Tyler |
Indexes: | [Date] [Thread] [Top] [All Lists] |