Hello Ron.
Thanks for the tip, which is why I've copied this to the list as well.
I'll be checking the co-ax connectors carefully, although mechanical shock
doesn't make the TX frequency jump at all.
Paul MW0CDO
Happy Holidays!
----- Original Message -----
From: "Ron Schuster" <rschuste@one.net>
To: <gw7lhi@hotmail.com>
Sent: Friday, March 29, 2002 9:31 PM
Subject: Omni
> I had problems with my V jumping frequency and changing frequency day to
> day. I worked on the BFO settings at first. It was hard to set and
forget
> the USB/LSB/CW BFO micro caps. It seemed like you could just touch the
> board and it would change frequency. Anyhow, the jump was traced to the
IF
> mini-coax plug that plugs into the board. It was loose.
>
> <>-< <>-< <>-< <>-< <>-<
> Ron Schuster (N9RC)
> Cincinnati, OH
> rschuste@one.net
> <>-< <>-< <>-< <>-< <>-<
>
>
>
|