Thanks for the compliment.
73
Bob K4TAX
----- Original Message -----
From: "Irvin A Weinman" <iawein2@cox.net>
To: "Robert & Linda McGraw K4TAX" <RMcGraw@Blomand.Net>
Sent: Wednesday, March 27, 2002 8:38 PM
Subject: Re: [TenTec] Century 21 keying
> Thanks a million, Bob. Your remedy worked perfectly. The keying is just
super
> now on my C-21.
>
> Robert & Linda McGraw K4TAX wrote:
>
> > Put several turns of the RG-58 through a donut core. Changes are that
> > common mode current on the outside of the coax is getting back to the
> > operating area.
> >
> > 73
> > Bob K4TAX
> >
> > ----- Original Message -----
> > From: "Irvin A Weinman" <iawein2@cox.net>
> > To: <tentec@contesting.com>
> > Sent: Wednesday, March 27, 2002 12:56 PM
> > Subject: [TenTec] Century 21 keying
> >
> > > Can someone help me with a keying problem with the C-21? With a dummy
> > > load, the keying is perfect, but with the antenna connected and
> > > loaded,on any band, apparently r.f. is getting into the keying
circuit,
> > > because the keying clips and becomes chirpy. Is there some place I
can
> > > filter or bypass to eliminate the problem? I am feeding an SGC smart
> > > tuner on the roof of my condo with 40 feet of RG58. The antenna is a
> > > sloper in the tree. There is a counterpoise on the flat roof. Toroids
in
> > > the keying lead and in the a.c. line do not seem to help. Irv W7GX
> > >
> > > _______________________________________________
> > > TenTec mailing list
> > > TenTec@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/tentec
> > >
>
>
|