Hi Eric,
Serial switch boxes are fairly inexpensive now days. Maybe you could get a
four position one and jumper the switch contacts so all four outputs are in
parallel.
73,
Ken W7TS
-------------------
Kenneth E. Kinyon
34 Princeton Circle
Longmont, CO 80503-2106
Voice: (303) 684-0037
Fax: (303) 776-5088
E-mail: W7TS@earthlink.net
W7TS@qsl.net
W7TS@arrl.net
ALPCA #8339
ARRL-LM
-------------------
-----Original Message-----
From: tentec-admin@contesting.com [mailto:tentec-admin@contesting.com]On
Behalf Of Eric Rosenberg
Sent: Friday, March 08, 2002 08:41
To: tentec@contesting.com
Subject: [TenTec] Break-out or Band Decoder Box?
My computer drives my Omni-6 Plus, Herc II and 301.
At the moment, I have a single cable that strings them all together.
For the sake of my sanity, I'd like to replace it with a box
that takes that single serial cable from the computer and then
breaks it out into three or four (should I get lucky/wealthy
and find/purhase the TT auto tuner).
No change in signal levels or anything else, just sending that
one RS-232 line from the computer to four different devices.
Does such a box exist, or will I have to fabricate one (AARGH!).
Thanks in advance,
Eric W3DQ
Washington, DC
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|