Have you tried changing microphones?
Try using a dummy load and listen to yourself on another receiver to see
what gives.
Try reducing power and see if that has any effect.
Make sure your power supply is at a good distance from that Jupiter.
Do you have any RFI in the shack? Tried using a field strength meter to
sniff around?
Have fun.
Steve Ellington
N4LQ
-----Original Message-----
From: Bill Taylor(W4WBT) <w4wbt@fmci.net>
To: tentec@contesting.com <tentec@contesting.com>
To: <tentec@contesting.com>
Date: Sunday, January 07, 2001 10:18 PM
Subject: [TenTec] Hiel microphones and Tentec
>
>I am having problems with what appears to be RF getting into the
>audio when using the Hiel boom headset with the Jupiter. The reports
>I get is that the audio starts off fine but after about a second or
>two, it gets a "fuzziness" to it. Power levels don't seem to change
>the reports. I have the audio gain set to about 50% and seem to have
>plenty of audio. I am wondering if it is really RF or maybe something
>else. Anyone had any experience with this? I assume the peagus would
>have the same problems or fixes?
>Bill Taylor
>w4wbt
>
>--
>FAQ on WWW: http://www.contesting.com/FAQ/tentec
>Submissions: tentec@contesting.com
>Administrative requests: tentec-REQUEST@contesting.com
>Problems: owner-tentec@contesting.com
>
>
--
FAQ on WWW: http://www.contesting.com/FAQ/tentec
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
|