Vince,
You got me.. I went over to the rig just now, and, the PTT/VOX switch on
the bottom seems to make zero difference... Hmmm wonder why I thought that
before... And, now I wonder why that switch is there... and , why is the 9v
battery there?
At 10:41 AM 10/11/99 , vbbond@ix.netcom.com wrote:
>Robert wrote:
> >
> > I noticed on the 705, that the VOX switch on the bottom of the mic MUST
> > also be in VOX mode... So, on my Omni Vi+ the configuration to run VOX is
> > Vox mode on Omni lit (on), 705 mic switch on bottom set to VOX, and, the
> > lock button enabled (little black button) so that the red led on mic is
> > activated
>
>That runs counter to my experience. To quote the TT705 instructions:
>"When using the microphone with TEN-TEC transceivers, however, this
>switch must be in the PTT position." If using an Omni 6+, you need only
>depress the VOX button on the rig and lock the mic (small black button
>on mic) to utilize vox operation. The slide switch is for use with NON
>TT gear, again, according to the instructions. Hope this helps.
>
> Vince/K7NA
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|