Henry,
I'm not sure it has to be shielded cable. I have a home brew version of
the remote VFO and just used the 4 conductor flat type telephone cable.
I've not had any rf problems even with an amp running and the cable is
very flexible. The cable is about 6 feet long.
73 good luck, Jeff aa8ve
On Mon, 04 Oct 1999 20:43:42 -0700 Henry Mauro <henry@northcoast.com>
writes:
>
> I purchased a model 301 kit (remote vfo knob in a box for the Omni
> 6) a
> while back. I was unable to find suitable cable for it locally.
> According to the instructions on KG5U's web site, it is supposed to
> be a
> 3-conductor, shielded cable. I found a 4-conductor cable but it was
> too
> large to fit the strain relief provided with the kit, and the wire
> looked large for the molex connector on the encoder. Anyone have a
> part
> # and/or source for the right cable?
>
> Henry, W6GZ
> henry@northcoast.com
___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|