Argosy "AGC pop" cap change

[turner@safety.ics.uci.edu (Clark Savage Turner WA3JPG)]

The sometimes recommended change of C30 on the audio/IF board in
the Argosy does indeed cure the "popping" problem.  It also cures
the rig of full QSK, the changeover time becomes pretty sluggish
with the 10uf cap in place of the 1uf.  IF full, tight QSK is not
your bag, the change is nice.  I put the old cap right back in :-) .
I am not that worried about it to try a 4.7uf cap in there, that
might be a good compromise though.

Clark
WA3JPG