Del Seay wrote:
>
> I talked this morning to the techs at TenTec regarding the OMNI-6.
> They said that another change they are routinely making on all
> Sixes passing through the lab, is on the Passband Tuning Board.
> Resistors R7, R8, and R9 pass through the board and make the ground
> connection on the bottom side. These should be also soldered to the
> foil on the top side.
My Omni 6 serial # 05A10106 has these 3 resistors soldered to the top
side.
73, de ARt WU2K
--
72,73, de Art Searle, WU2K, Long Is., NY, ARRL Life Member
QRP-L #524, QRP ARCI #9123, NorCal pending, DXCC MX & CW HR
NRA Benefactor Life Member, NMLRA Life Member, AMA Life Member
NRA Certified Firearms Instructor, Dale Earnhardt Fan Club
|