For Flex-6000 series radios you can also use CATASC and CATHEX commands.
The radio will then generate CW using CWX which is its internal keyer.
It does also support Winkeyer emulation via a virtual serial port in
SmartSDR CAT.
73
Ria
N2RJ
On Tue, Apr 17, 2018 at 8:54 PM Jamie WW3S <ww3s@zoominternet.net> wrote:
>
> not sure why you would want to do that....but.....I think MM allows it for
> Yaesu radios.....the key is not the software, but the radio.....for the
> software to do it, it needs triggered by a CAT command....
> ----- Original Message -----
> From: "John Geiger" <af5cc2@gmail.com>
> To: "CQ Contest" <cq-contest@contesting.com>
> Sent: Tuesday, April 17, 2018 4:33:17 PM
> Subject: [CQ-Contest] Contesting software question
>
> Does anyone know of contesting software that will let you use the CW keyer
> memories that are programmed in your radio for canned messages instead of
> the software storing the memories and keying the rig itself?
>
> 73 John AF5CC
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
>
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|