The AR Cluster commands for filtering are here:
http://ab5k.net/ArcDocsVer6/UserManual/ArcDx.htm#SetDxFilter
I usually set to only show spotter sources as NY and the states around me.
Examples below. All of this can also be accomplished using the CC User
client, but you will have to play with the tabs for country, state etc. I
am not in front of my PC at the moment but do remember that you have to
allow country 'k' for US before you allow individual or groups of states.
Etc. You must always 'tell the cluster' with a button on each tab after
making changes.
*Clear Filter - --->set** dx filter*
*Set for North America- --->set** dx filter SpotterCont=na *
*United States - --->set dx filter** SpotterCty=k*
*The individual states I want - --->set dx filter*
* Spotterstate=ny or Spotterstate=ma or Spotterstate=vt *
*or Spotterstate=pa*
*Or in your case - **set dx filter** Spotter=CALL OF SPOTTER*
Good Luck. Once you figure it out and get the hang of it, it's easy to
make changes.
On Thu, Jan 2, 2014 at 9:29 PM, Jeff Blaine <jeff@ac0c.com> wrote:
> Dave,
>
> Thanks for the suggestion. Do you recall what the VE7CC command to filter
> a specific spot source?
>
> I don’t see a filter option in the VE7CC client - or on the web site
> beyond the sh/bydx command (but that’s not a filter).
>
> 73/jeff/ac0c
> www.ac0c.com
> alpha-charlie-zero-charlie
>
>
> *From:* Dave Lindsley <dave.lindsley@gmail.com>
> *Sent:* Thursday, January 02, 2014 5:03 PM
> *To:* Jeff Blaine <jeff@ac0c.com>
> *Cc:* cq-contest@contesting.com
> *Subject:* Re: [CQ-Contest] RBN feed for a single source skimmer under HRD
>
> RBN is an AR cluster, and I believe you can set a default filter for
> yourself once logged in, that will be retained with your profile for
> everytime you login. I'm not positive. Filter details here:
> http://www.ab5k.net/ArcDocsVer6/UserManual/ArcDx.htm#SetDxFilter
>
> I use VE7CC Cluster software where I filter, then minmize, but then set
> my client (HRD) to connect to the built in Telent port of VE7CC software,
> at localhost:7300 - This yields some very granular control.
>
>
> On Thu, Jan 2, 2014 at 3:56 PM, Jeff Blaine <jeff@ac0c.com> wrote:
>
>> Is there a way to specify a single source skimmer in your RBN feed
>> without using a smart telnet application?
>>
>> Some of the local guys are using HRD and as far as I can tell, the client
>> in that program does not have a filter capability to filter for a given
>> spotter in the feed.
>>
>> I know you can tell some of the cluster nodes like CC or AR to give you
>> the single feed, but I don’t know if that can be done within HRD.
>>
>> If anyone has any simple instructions on that, they would appreciate it.
>> Thanks!
>>
>> 73/jeff/ac0c
>> www.ac0c.com
>> alpha-charlie-zero-charlie
>>
>> _______________________________________________
>> CQ-Contest mailing list
>> CQ-Contest@contesting.com
>> http://lists.contesting.com/mailman/listinfo/cq-contest
>>
>
>
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|