CQ-Contest
[Top] [All Lists]

Re: [CQ-Contest] contests and participation on air

To: <cq-contest@contesting.com>
Subject: Re: [CQ-Contest] contests and participation on air
From: "Rick Kiessig" <kiessig@gmail.com>
Date: Tue, 23 Jul 2013 09:47:51 +1200
List-post: <cq-contest@contesting.com">mailto:cq-contest@contesting.com>
It's also worth mentioning that REC533, upon which Zoneprop is built, is 
intended to be used to estimate long-term averages, not to make short-term 
predictions.  Using short-term Kp and running frequent updates doesn't change 
the nature of the underlying model.  

http://www.voacap.com/itshfbc-help/rec533-general.html 

73, Rick ZL2HAM


-----Original Message-----
From: CQ-Contest [mailto:cq-contest-bounces@contesting.com] On Behalf Of David 
Gilbert
Sent: Tuesday, July 23, 2013 5:25 AM
To: cq-contest@contesting.com
Subject: Re: [CQ-Contest] contests and participation on air


I'm a subscriber to the VOACAP mailing list, and here's a recent (just a few 
weeks ago) comment from George Lane, one of the key original members of the 
IONCAP development team.

"Beware  of using CCIR Data Base D or D-1, etc.  When I was on the Working 
Party 6 of the CCIR, I discovered that the Data Base D had been ‘normalized’ to 
remove the antenna gain data based on takeoff and arrival angles dependent 
totally on path distance!  This totally corrupted the data base.  This is one 
reason I totally suspect REC. 
533.  Further when I ran REC 533 back in 1996 when I still worked at VOA using 
Greg Hand’s version, I found that signal power could increase as one went from 
1 hop to 2 hop and 3 hop distances.  For some reason I just don’t believe the 
Ionosphere works as an amplifier until you get near the antipodal location.  
Perhaps, that has been fixed, I hope."

For what it may be worth ...

73,
Dave   AB7E


On 7/22/2013 7:01 AM, VE5ZX wrote:
>
> One could also check Zoneprop ( http://www.radiosport.ca/zoneprop/ ).
>
> ZoneProp uses a widely accepted propagation engine to determine the 
> band on which a contestant in one CQ DX zone is likely to be able to 
> contact a contestant in another CQ DX zone taking into account the 
> current geomagnetic activity.
>
> ZoneProp produces a 40 zone by 40 zone matrix that is updated hourly 
> at approximately 20 minutes past the hour. The intersection between a 
> row and column gives the band on which a contestant in the zone 
> represented by the row is mostly likely able to contact an contestant 
> in the zone represented by the column. The zone numbers in the left 
> hand column are clickable. Once clicked the information for that zone 
> is displayed in isolation above a map of CQ DX zones. The pages are 
> refreshed every 10 minutes in order to capture hourly updates of the 
> matrix
>
> Technical details
>
> At the heart of the ZoneProp program is REC533, an NTIA/ITS rendering 
> of the ITU-R P.533 package. It was chosen following many years of 
> NCDXF Beacon Chain monitoring results from various sources, and 
> comparisons with actual ionosonde data. As with any propagation 
> predictions program the input parameters require careful consideration 
> and calibration. The results from the above mentioned studies 
> contributed to the monthly publication of various predictions tables, 
> in the RSGB’s - RadCom and the Italian - Radio Rivista magazines to 
> name but two. This continuing experience has been applied to the 
> production of ZoneProp.
>
> The web output of the model first queries the WWW for the relevant SSN 
> and an up-to-date K-index figure. These are used to build an input 
> file that is then passed to the prediction program for the required 
> results, FOT (Frequence Optimum de Travail), or Optimum Working 
> Frequency. Unlike the vast majority of predictions programs the 
> K-index is utilized to adjust the FOT as it rises and falls. The 
> International Reference Ionosphere (IRI) and actual ionosonde outputs 
> were used to determine the variations in FOT.
>
> The other input variances are the co-ordinates for the zones, which 
> are the CQ-WW zones. The zone co-ordinates were chosen to be either in 
> the center of the zone or at the highest population density that is 
> nearest to the center. The correct method of reading the matrix is to 
> use the left hand list of zones as the starting point and then to take 
> the destination zone from along the top. This will show the correct 
> FOT for the time of day, propagation is not always reciprocal. An 
> example of this is on an East/West path when one end of the path is in 
> darkness and the other in daylight. During the morning between W1 and 
> W6, is a good example.
>
> Syl -VE5ZX
>
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest

_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
<Prev in Thread] Current Thread [Next in Thread>