I think this round stamper is quite popular... scroll down the page to see
it...
http://www.qth.com/stamper/stamp1.htm
73 de Bob - KØRC in MN
----- Original Message -----
From: "Bill Parry" <bparry@rgv.rr.com>
To: "'John Laney'" <k4bai@worldnet.att.net>; "'cq-contest reflector'"
<cq-contest@contesting.com>
Sent: Tuesday, February 12, 2008 4:11 PM
Subject: Re: [CQ-Contest] QSLs
>I had forgotten to mention that I use to little round stamp saying
>confirmed
> by W5VX also. I had a hard time finding one of these, but I am sure that
> someone makes these as a specialty item if you know where to look.
>
> Incidentally, John, I used to use those mail labels but they are a real
> pain
> and they are kinda expensive. In fact I still have an almost complete box
> of 100 sheets of Avery 5161 labels in my desk here. I converted over to
> printing directly of the cards. Much less of a pain to deal with. (Ever
> get
> one of those *&#!# labels stuck down in your printer!) My arthritis
> convinced me to stop with the labels. I bought a little faster printer
> with
> bigger ink cartridges, larger document feeder and I'm set. I can take 200
> QSLs from the bureau envelope, put them in the DXBase QSL "que", and print
> them out in alpha order in about an hour. That is heaven to someone who
> can
> barely write.
>
> Bill, W5VX
>
> -----Original Message-----
> From: cq-contest-bounces@contesting.com
> [mailto:cq-contest-bounces@contesting.com] On Behalf Of John Laney
> Sent: Tuesday, February 12, 2008 12:35 PM
> To: cq-contest reflector
> Subject: [CQ-Contest] QSLs
>
> Dennis: Your remark about signing across the label or using a rubber
> stamp reminds me of an experience I had a few years ago. (BTW, I use a
> round "confirmed by K4BAI" stamp that is reinkable and doesn't require
> use of a stamp pad.)
>
> I had worked and QSLled a ZC4 on a band I needed, maybe 17 CW. While
> waiting for a reply to my QSL with SAE and IRC, I got an e-mail from a
> M3 or M0 operator who wanted to know if I had his QSL from the ZC4,
> since he got mine in his SAE by mistake. I e-mailed him back and said
> that I had had no reply to my request yet. He then responded that I
> shouldn't worry about it because he had peeled the label off and had
> written his QSO information in place of the label, so he had what he
> needed! Hard to imagine that anyone thinks that is so OK that he could
> confess to it in an e-mail, but apparently he didn't think he was doing
> anything wrong. So, a rubber stamp across the label would have
> prevented that. Eventually, I got my envelope back from the ZC4 with my
> own QSL correctly filled out. Forgot to notice if it used a label or
> not. So, the suggestion you have received with regard to making the
> labels almost foolproof by use of a stamp or signature partly on and
> partly off the label was a good one. 73, John, K4BAI.
>
>
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
>
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
>
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|