RF in the shack? I have a lot of RF in the shack on 40 and the tuner in
my MkV has a devil of a time at the low end of 40 cw.
73, Jim VE7FO
VE5ZX wrote:
> For some reason my Icom 746 Pro ATU will not work on 15m when loading a
> C31XR feed with separate feedlines. The swr is below 1.5:1 from 21000 to
> 21400 and rise to 2.2 at 21450. The ATU works fine if I try to load the 20m
> ant on 15m so I presume the ATU is work - at least some what.
>
> The impedance of the antenna measured at the rig at the end of feedline that
> is cut to multiples of lamda/2 on 15m ranges from 50-j1 to 35+j32.
>
> The ATU works fine on other bands under similar conditions.
>
> Any suggests why this might be the case?
>
> tnx Syl
>
>
> Sylvan Katz - VE5ZX
> Saskatoon, SK
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
>
>
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|