Chuck. I experienced the exact same problem with my MFJ and MP last March.
Reason unknown. Thanks for the tip on the JMP2.
73
Jim Neiger N6TJ
----- Original Message -----
From: <KI9A@aol.com>
To: <smc@w9smc.com>
Cc: <cq-contest@contesting.com>
Sent: Sunday, October 16, 2005 8:10 AM
Subject: [CQ-Contest] MFJ434 voice keyer woes
> Hey all, while setting up for todays Illinois QSO party, I noticed my new
> mfj voice keyer was tuning the VFO on my FT1000MP Field downward. I
> checked all
> connectors, thenm popped the hood on the MFJ. I found all jumpers int he
> correct place, so, I figured I'd pull them one at a time until the
> problem
> cleared. There is a 3-position jumper called JMP2, that has a setting for
> Yaesu &
> ICOM/Kenwood. First off, what does this do? Anyone know? I pulled the
> jumper,
> & it stopped the VFO. Seems to work fine with no jumper installed, so, I'm
> going to use it that way.
>
> But, what I want to know, is what the heck does JMP2 on this thing? I
> can't
> find any feature that is affected so far. Audio is fine, memories are
> fine....maybe it enables the mike installed on the front of the MFJ to
> tune the VFO
> up or down??
>
> Hope to see you all on the ILQP this afternoon! Work us often, we are
> going
> to have some very dedicated op's in mobiles (with gas at almost
> $3/gallon!),
> so get on & make it worth their efforts!
>
> 73! Chuck KI9A
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
>
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|