well,
the right hand works. typing speed down to 30wpm. We'll be qrv for ss
cw with ah8i and km6as to supply two hands when necessary.
update on projects that i asked for help from all you experts:
1: tri-bander repair hints -
We found corroded self - tapping screws
on the tubular match on the th-3. changing
these out to stainless bolts and cleaning
the match up fixed all problems. we will use
this for a rcv ant (low) for ss.
2: 40m klm matching methods -
used 2 parallel pieces of rg-59, 1/4 wave at
7.1 mhz, between balun and 50 ohm feedline.
swr now < 2:1 7000 to 7200 - yay
i bet yall thought this was going to involve some I and W2 type guys,
huh?
we played wid cqssb - about 185q's, 60z and 95 countries.
cu on ss
eric nv6o
edwoods@pacbell.com
>From Rick Zabrodski <zabrodsk@med.ucalgary.ca> Tue Nov 1 20:15:04 1994
From: Rick Zabrodski <zabrodsk@med.ucalgary.ca> (Rick Zabrodski)
Subject: cqww ssb qrp results (or lack of)
Message-ID: <Pine.SUN.3.91.941101130759.20259A-100000@ume>
Call: VE6GK Country: Canada
Mode: SSB Category: Single Operator QRP
BAND QSO QSO PTS PTS/QSO ZONES COUNTRIES
20 90 185 2.06 13 19
---------------------------------------------------
Totals 90 185 2.06 13 19 => 5,920
Equipment Description: icom 751a five watts output
3 element monobander up 65 feet
Comments: Condx less than ideal. Howover, with the exception of
a few weak europeans I worked what I heard and pileups were actually
EASIER to break up sometimes. I must admit to only spending 6 or 7
hours this time round and watched my kids hockey games instead!
****************************************************************************
Dr. Rick Zabrodski BSc, MD, CCFP(E) * VE6GK
EMAIL: zabrodsk@med.ucalgary.ca *
Packet: VE6GK@VE6YYC.#cgy.ab.can.na * "Power is no subsititute
Phone: (403) 271-5123 Fax: 225-1276 * for skill."
****************************************************************************
>From CHARLES MINK <MINKC@LAKEHURST.NAVY.MIL> Tue Nov 1 20:17:12 1994
From: CHARLES MINK <MINKC@LAKEHURST.NAVY.MIL> (CHARLES MINK)
Subject: CT Keyboard Delays
Message-ID: <seb6685d.088@LAKEHURST.NAVY.MIL>
>>>>>>>>>>>>>>>
>CT Comments: Used version 9.13.....
> 1) Keyboard would slow down and not respond to my
input.
> sometimes laging from .5-1 second.
> 2) While logging a station and hitting enter it would
> freeze up and would say "IC-765 Radio Timed out".
I had the same thing happen with 9.10a and an FT-1000. I think I've
traced it to RF getting into the Yaesu interface or the RS-232 line
that connects to it.
More work to do before SS.
Bill
<<<<<<<<<<<<<<<
I experienced the same phenomenon with my FT-1000 and CT 9.13. I
also think it relates to RF being introduced into either the serial
card or the FIF-232C. The delay was typically accompanied by a
"Yaesu Radio Timed Out" message. I haven't yet solved it but intend
to use more ferrite and improve grounding.
73,
Charlie
KF2U
>From fish@crl.com (Bill Fisher, KM9P Concentric Systems, Inc.) Tue Nov 1
>20:44:44 1994
From: fish@crl.com (Bill Fisher, KM9P Concentric Systems, Inc.) (Bill Fisher,
KM9P Concentric Systems, Inc.)
Subject: Force-12 Dipole Summary
Message-ID: <199411012044.AA12242@mail.crl.com>
I heard from alot of folks on this one. However, most of you said something
to the effective of "you need to talk to _________".
There is an upgrade for this antenna. The 1st versions used the galvanized
guy wire as part of the linear loading. Tom (N6BT) discovered later that
this added .8db loss to the system compared with using copper. They have
fixed the problem and will fix it for anyone with an older version of the
antenna. Just call them.
Now...
I talked to K9UWA on the phone. He has one up at 150+'. He says it is
always down 10-20db from his K8UR phased array. He is using the one with
the galvanized guy cable. This still doesn't sound right to me. If I were
going to guess, I'de say he has something else wrong. Maybe bad coax or
some kind of other problem.
>From N3RS today... Thanks Sig!
Well I suppose one weekend of contesting with the EF-180A under really piss
poor conditions does merit at least a preliminary report. The bottom line is
that we will definitely keep the thing in the air! It was used almost exclus-
ively during the contest for our 80M effort. It has the new wire & is at 140
feet, up ten feet above the top of my new 55G tower. We had the following
results with it:
No 77 QSO's
South America 17 QSO's
Europe 90 QSO's
Asia 1 QSO's
Africa 7 QSO's
Oceania 6 QSO's
Total 198 QSO's 23 Zones, 81 Countries
It was the first time we were actually able to call CQ and get answers from
here. I think it will perform even better when conditions favor higher angle
propagation. If it hold up during the winter wx, I will likely move to add
another element and make a beam out of it.
I also talked to AA6MC about his, but he is also using the galvanized wire
version. He also doesn't have anything else to compare it to at his place.
I think anyone would benefit from a high flat top dipole. I know the KLM at
RJ works and K4VX's wire at 170' is better than anything else he has put up
including bobtail curtains. Maybe Dave will elaborate. I'll be placing the
order with Force-12 when the tower is up.
73
---
Bill Fisher, KM9P - Concentric Systems, Inc.
>From scotty@iquest.com (scotty neustadter) Wed Nov 2 06:32:04 1994
From: scotty@iquest.com (scotty neustadter) (scotty neustadter)
Subject: CQWW QRP
Message-ID: <m0r2TY8-0003EJC@vespucci.iquest.com>
CQWW Score Single Operator Assisted ORP
Q Z C
160 2 2 2
80 6 3 5
40 11 9 7
20 72 18 48
15 89 19 58
10 53 11 22
ALL 233 62 142 Total Points = 117300
Time On: 11.7 Hrs
Time Off: 35 Hrs
No major problems, was suprised that I was able to even get one 40 meter QSO
with Europe. F6BEE has good ears! Worked the 80 meter QSOs just before dusk
on Saturday night before the big guns showed up. The 160 meter Qs were US
and Canada. Fortunately was able to build QSO total by working South America
and Caribbean Going QRP means that there is no reason to stay up at night!
73 Scotty, N4PYD
Scotty Neustadter, N4PYD
North Alabama DX Club
Huntsville Hamfest Chairman
"Entropy is not what it used to be"
>From Richard Hallman <ki3v@connectus.com> Wed Nov 2 00:39:33 1994
From: Richard Hallman <ki3v@connectus.com> (Richard Hallman)
Subject: CT Keyboard Delays
Message-ID: <Pine.SUN.3.91.941101163737.7537A-100000@africa.connectus.com>
I Understand the RF problem with CT....But why doesit do it with
all the new versions past 9.02??? I have had no problems with 9.02
and 765 Time outs. Ill move this off to the CT-USER list after
this message. See Ya! Rich KI3V/7
*****************************************************************
Richard Hallman Internet: ki3v@connectus.com
11870 Heartpine St IP Address:
Reno Nevada 89506 Amateur Radio: KI3V
*****************************************************************
On Tue, 1 Nov 1994, CHARLES MINK wrote:
> >>>>>>>>>>>>>>>
> >CT Comments: Used version 9.13.....
> > 1) Keyboard would slow down and not respond to my
> input.
> > sometimes laging from .5-1 second.
> > 2) While logging a station and hitting enter it would
> > freeze up and would say "IC-765 Radio Timed out".
>
> I had the same thing happen with 9.10a and an FT-1000. I think I've
> traced it to RF getting into the Yaesu interface or the RS-232 line
> that connects to it.
> More work to do before SS.
>
> Bill
>
> <<<<<<<<<<<<<<<
> I experienced the same phenomenon with my FT-1000 and CT 9.13. I
> also think it relates to RF being introduced into either the serial
> card or the FIF-232C. The delay was typically accompanied by a
> "Yaesu Radio Timed Out" message. I haven't yet solved it but intend
> to use more ferrite and improve grounding.
>
> 73,
>
> Charlie
> KF2U
>
>
|