Have you given any thought to converting to some of the Russian tubes.
Would justhave to be an easier rebuild than converting to LDMOSFET’s. And, when
I last looked those tubes are still less expensive than ‘Merican alternatives.
Steve NR4M
Sent from my iPhone
> On Dec 9, 2025, at 6:03 AM, Douglas L via Amps <amps@contesting.com> wrote:
>
> I wouldn’t say that using an LDMOSFET is a retrofit.
> It would basically mean building an entirely different amplifier with a
> different power supply, different input and output networks, etc.
>
>> On Dec 9, 2025, at 5:32 AM, Steve Thompson via Amps <amps@contesting.com>
>> wrote:
>>
>> https://www.ampleon.com/products/extremely-rugged/75-v/ART4K0FX.html
>>
>> But not the easiest retrofit 🙂
>>
>> Steve G8GSQ
>>
>>>> On 09/12/2025 08:37, Douglas L via Amps wrote:
>>> Has anyone created a work around to replace the 3CX800A7 tubes in the
>>> AL-800, the AL800H, Alpha, Ten-Tec and other amps that used this tube?
>>> Eimac versions are greater than $1500 and the Chinese subs, last I looked,
>>> were pushing toward $1000/tube. Machlett, Penta and the like are simply
>>> rebranded Chinese tubes.
>>> Medical pulls have largely dried up with MRI and other machines going solid
>>> state.
>>> Thus the tube pricing has gotten ridiculous.
>>> Perhaps the only answer is going to solid state amps?
>>> 73,
>>> DougWA1TUT
>>> _______________________________________________
>>> Amps mailing list
>>> Amps@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/amps
>>
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|