If the high vswr is on the input to the FL2100B except on 40 m. then
my guess is the tuned input for each band is not getting switched in
properly. The switching scheme, which is probably involving the
bandswitch and/or relays has a fault. I'd start looking at it. I am
utterly unfamiliar with that amp however.
73 and good luck
Rob
K5UJ
On Mon, Feb 6, 2012 at 1:45 PM, Eduardo Somoano C
<co8ly@frcscu.ciges.inf.cu> wrote:
> Dear friend Hal
>
> I didn't respond you before for problems with the HDD of my old computer.
>
> I made all that you told me and the continuous problem.
>
> All the antennas, coax and connectors are in good state and very connected.
>
> I think that the problem this in the Lineal amp but also change those
> condensers of each band in the input coil and all continuous one equally.
>
> Please help me to look for the cause maybe your you have another idea of the
> problem.
>
> Strong hug.73.-
> Eduardo. CO8LY
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|