Thank you for the reponse which did the trick once I pulled the band data
plug.
Mike
K5HDU
----- Original Message -----
From: "William Liporace - WC2L" <wc2l@wc2l.com>
To: "'Dr. Michael Hunter'" <drmikeh@comcast.net>
Sent: Friday, October 10, 2008 9:13 PM
Subject: RE: [Yaesu] FT 1000D and no RF
> Did you unplug the band data plug from the radio? I think that will cause
> the same issue.
>
> Will WC2L
>
> -----Original Message-----
> From: yaesu-bounces@contesting.com [mailto:yaesu-bounces@contesting.com]
> On
> Behalf Of Dr. Michael Hunter
> Sent: Friday, October 10, 2008 7:15 PM
> To: yaesu@contesting.com
> Subject: [Yaesu] FT 1000D and no RF
>
> Just shipped my FL 7000 off today to repair so tried to fire up the 1000D
> and find I have no RF output. The antenna receive is working fine but when
> I
> hit the key, the needle deflects backward. Not any better on a dummy load.
> Retuned CW with no luck and the automatic tuner will not help. Can't
> believe
> that disconnecting the amp would cause this so must be missing something I
> am missing
>
> Any suggestions before I panic ?
>
> Mike
>
> K5HDU
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
>
>
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|