Hi John:
Yes, the RTTY plug is correct in the manual - it's very basic. What program
or device are you using to decode RTTY ? Are you using an interface of some
kind - Rigblaster Plus, microKeyer, etc. ? If you are using certain
interfaces, you should set the RTTY to reverse in the Mark V menu. This
should be in your instructions. All other menu settings should be default
settings.
73, Jamie
WB4YDL
-----Original Message-----
From: yaesu-bounces@contesting.com [mailto:yaesu-bounces@contesting.com] On
Behalf Of jclark@brownjanitorsupply.com
Sent: Wednesday, August 01, 2007 8:48 AM
To: yaesu@contesting.com
Subject: [Yaesu] RTTY ON A MARK V
I am trying to get RTTY working on a Mark V. All I
can hear the tone shift but all i get out is the
carrier. I have double and triple checked the cable
and it is wired like the manual shows. ANYONE KNOW IF
THE MANUAL IS CORRECT???? Or does anyone else have
any Ideas.
John N5ER
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|