I have a power fold back problem with my FT2500M.
On high power I can advance the pot to get about 30 watts on a
particular frequency. When I re-key the power sometimes comes back to
30w, other times its 5watts.If I keep keying it comes back.
The input voltage is 13.8 volts (measured on a Fluke) Reflected power
(measured on a Bird 43) less than a half watt.
Is there any pot or control for fold back control? The schematic does
not show one.
Also, what does the pot marked "stop" do?
73, Larry
K2LS
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|