Don,
Your comment reflects where I think I am at the moment - I would like to
use various headsets with the K2 without having to change the K2 to be
any other radio or radios than a K2. Although Elecraft shows a
ProSet-K2 on their website, I can't find an adapter-only part anywhere.
73, Byron
Don Wilhelm wrote:
>If this is the main mic that you will use with the K2, then you can wire the
>K2 mic configuration header for the Yaesu pinout, and then use whatever
>adapter you use with the Yaesu on the K2.
>
>OTOH, if you use a variety of mics with the K2, I recommend that you wire
>the mic configuration header for the Elecraft pinout and make/buy an adapter
>for any other mic that you will use. I see nothing wrong with changing the
>pinout at the mic plug rather than dealing with the complication of changing
>the wiring in the K2 just to accomodate a variety of mics. Of course, if
>you must use a mic for the K2 as well as with another transceiver, just wire
>the K2 to match whatever other transceiver the mic comes from. The
>instructions for wiring the mic configuration header to mathc a variety of
>mics is in the KSB2 manual.
>
>73,
>Don W3FPR
>
>
>
>>-----Original Message-----
>>I have a Heil ProSet that I use with my Yaesu FT1000MP.
>>Does anyone know the part number for the K2 adapter so I can use the
>>Heil with the K2?
>>
>>
>>
>>
>
>
>
>
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|