Hello Ryszard,
I am using a FT 920 with Inrad board and a 2.1 kHz and 1.8 kHz filter, it
helps me a lot on 40M and also on 80M, before I did not like to work on 40M
but now it my favorite band (well sunspot might have some things to do with
that also ;-) ), if you go for it remember, to check/adjust the Rx and Tx
carrier offset in the menu.
pictures of the Inrad board:
www.thornelius.dk
Push the FT920 button / then the Inrad button, there are some pictures of
the Inrad board in my FT 920.
73 de OZ5RZ Benny
-----Oprindelig meddelelse-----
Fra: yaesu-bounces@contesting.com [mailto:yaesu-bounces@contesting.com] På
vegne af ddicky@gazeta.pl
Sendt: 5. februar 2006 21:19
Til: yaesu@contesting.com
Emne: [Yaesu] FT920 and filters.
Hallo All,
I am using Yaesu trx FT920. The trx has SSB filter 2,4 kHz and CW
filter 500Hz. In the last CQ WW 160 Contest I had problem with the
reception. My filters are too wide. I'il like to change my filter
for CW 500 Hz on INRAD 250 Hz and SSB 2,4kHz on INRAD 1,8 kHz.
Have you got any experience in this? How can I fix those filters? Is
it possible to fix, on the board in FT 920, one filter on CW and one
filter on SSB only? Can I replace YF116C (500 Hz) and XF8,2M filters
(2,4KHz),installed on my board already, with INRAD filters?
73 de Ryszard
SP6GPJ
--
Wysokie Obroty Magazyn - nowy miesiecznik motoryzacyjny. Pierwszy numer juz
w sprzedazy.
Wiecej informacji na: http://auto.gazeta.pl/auto/0,0.html
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|