Rich,
This FT-1000MP information is applicable to the FT-990:
http://www.qsl.net/n1eu/Yaesu/MPAcom.htm
73,
... Joe, W4TV
> -----Original Message-----
> From: yaesu-bounces@contesting.com
> [mailto:yaesu-bounces@contesting.com] On Behalf Of Richard DiDonna
> Sent: Friday, January 13, 2006 12:37 PM
> To: yaesu@contesting.com
> Subject: [Yaesu] FT-990 linear connections
>
>
> I'm wiring up a DIN plug to connect a FT-990 to an AL80A (a
> full QSK linear). Ive connected the neutral and hot pins.
> However, IIRC, the manual states that you connect Pin 3 and
> pin 8 with a jumper. The diagram appears to show pin 8 to pin 5.
>
> Which are the correct pins to use?
>
> 73 Rich NN3W
>
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
>
>
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|