Hello All
I am having a little problem with my ft1000mp and I was hoping maybe
someone on this list could give me some advice. I've never had any problems
with the rig. Last week, I hooked up a West Moutain "rig blaster" up between
the transceiver and my Dell PC. I enjoyed psk for the the first time and all
seemed to be working ok. I received good reports for everyone. I left the radio
and PC for about an hour and when I came back, the FT1000mp had lost all its
audio output from its speaker. I could hear no audio from headphones from
either the side speaker or any of the headphone jacks. I unhooked the rig
blaster and reconnected everything like before and nothing. I could key a
straight key in cw and the rig will transmit. I can key the handmike in ssb and
the transmitter is working. I can tune across busy portions of the 40 and 20
meter ssb bands and see the s-meter jumping from qso's but no audio output. I
didnt go into any of the hidden menu's and change anything. I was wonder
ing if there is a stuck relay? Its has been a long time, but is there a
"master reset" that I can do? I forgot the keystrokes to perform it. I know to
access the hidden menu's you depress "fast" and "enter". Any advice anyone
might have would sure be appreciated. I did a search on the internet and I was
unable to find any information. If I find out whats wrong or what I did wrong,
I will report that back to the list. I hope I dont have to box this monster up
and send it to yaesu for repairs.
73 and Good DX
Bill Capps
AF4OD
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|