Hi,
My yaesu do once same!
I take off memory battery and wait over the night,
after that all work OK.
Jari OH8LQ
----- Original Message -----
From: "Tony Heatwole" <tony@ajheatwole.com>
To: <yaesu@contesting.com>
Sent: Friday, July 01, 2005 6:57 PM
Subject: [Yaesu] Help for Flashing VFO Display on FT-920
> My Yaesu FT-920 occasionally goes into a mode where the VFO1
> frequency display flashes on and off about once per second.
> A power off-on sequence sometimes clears it, but usually it
> doesn't. A reset doesn't clear the condition either. While
> it's in this mode the receive audio output drops to just a
> low-level noise. After a while this condition seems to clear
> itself for no apparent reason.
>
> Any ideas on what causes this or how I can clear it?
>
> Thanks,
>
> Tony Heatwole, N3FX
>
>
>
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.323 / Virus Database: 267.8.8/35 - Release Date: 30.6.2005
>
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|