The other thing you might want to check is the PIN diode used to switch the
transmitter to the
antenna. If it gets leaky, it can cause some strange problems.
Dave....WA0ZZG
Message: 4
Date: Sat, 9 Oct 2004 09:19:48 +0100
From: Robin Thompson <robin@g3tkf.freeserve.co.uk>
Subject: Re: [Yaesu] FT1000D broadcast
To: yaesu@contesting.com
Message-ID: <Eo0H+xBk85ZBFwlx@g3tkf.freeserve.co.uk>
Content-Type: text/plain;charset=us-ascii;format=flowed
In message <000f01c4ad99$602697c0$60c8eb3e@Willem>, Willem Braeckevelt
<on5jy@village.uunet.be> writes
>Dr oms ,
>Any help on my FT1000D i have in evening hours strong broadcasting
>interference on 17m 30m and little on 20m ?
>If i put 40m dipole on 20m 17m 30m bands also broadcasting come up?
>Any idea whats wrong on receiver?
>
>
>73's Wim ON5JY
Sounds like it could be a noise blanker/ IMD problem Wim.
Have a look at some suggested mods for the FT1000 - this is a really
useful site !
http://www.angelfire.com/md/k3ky/page64.html
73
Robin
G3TKF
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|