Hi Don
There is a solution. MicroHAM band decoder can process frequency via CAT
from FT-1000MP and distribute it to the IC-PW1 amp via CI-V.
Look at www.microham.com
73 Jozef
----- Original Message -----
> Date: Fri, 2 Jan 2004 12:15:37 -0700
> From: "Don Richards" <donsay2@cox.net>
> To: <Yaesu@contesting.com>
> Subject: [Yaesu] Icom-PW1 and FT-1000MP
> Message-ID: <000501c3d164$cde30d50$45826b44@donsay1>
> Content-Type: text/plain;
> charset="iso-8859-1"
> MIME-Version: 1.0
> Content-Transfer-Encoding: 7bit
> Precedence: list
> Reply-To: Don Richards <donsay2@cox.net>
> Message: 1
>
> Is there an "adaptor" on the market that makes the FT-1000MP Mark V
> compatible with the Icom-PW1 amplifier in terms of the amplifier sensing
the
> FT-1000 selected band and the amplifier then automatically tuning to that
> band? Or has anyone constructed their own interface device?
> donsay2@cox.net
>
> ------------------------------
>
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
>
>
> End of Yaesu Digest, Vol 13, Issue 2
> ************************************
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|