Yaesu
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Yaesu] FT 1000D Band data connector pins

from [Nancy & Steve Lawrence] [Permanent Link][Original]
To: <yaesu@contesting.com>
Subject: [Yaesu] FT 1000D Band data connector pins
From: smlx@earthlink.net (Nancy & Steve Lawrence)
Date: Wed, 16 Jan 2002 18:55:00 -0800 
The 8 pin DIN plug pin numbering when viewed from the solder side

"Facing the mating side  of the plug and moving in a clockwise direction
from the key at the bottom of  plug insert)    7    1    4    2    5    3
   8    6 in the middle of  plug"

is correct and as shown in the Yaesu manual. Ignore any other numbering
scheme that may be stamped on the plug.

73, Steve WB6RSE
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • [Yaesu] FT 1000D Band data connector pins, Nancy & Steve Lawrence <=
Previous by Date:  [Yaesu] FT-736R audio noise, David G. Maley
Next by Date:  [Yaesu] Hum and my 1000MP, <nn4t@bellsouth.net (Steve Daniel)
Previous by Thread:  [Yaesu] FT-736R audio noise, <lloyd.korb@cle.philips.com (Lloyd Korb)
Next by Thread:  [Yaesu] Hum and my 1000MP, <nn4t@bellsouth.net (Steve Daniel)
Indexes:  [Date] [Thread] [Top] [All Lists]