Yaesu
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Yaesu] FT1000D & KamPlus on RTTY

from [Walters, Galen] [Permanent Link][Original]
To: <yaesu@contesting.com>
Subject: [Yaesu] FT1000D & KamPlus on RTTY
From: Galen.Walters@icn.siemens.com (Walters, Galen)
Date: Tue, 8 Jan 2002 13:27:06 -0800 
Does anyone have info on operating the FT1000D in the RTTY+LSB mode with the
KamPlus?
I am only able to operate in the LSB mode.  Also is Yaesu wiring info
correct?

Galen - KN6OZ
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • [Yaesu] FT1000D & KamPlus on RTTY, Walters, Galen <=
Previous by Date:  [Yaesu] Yaesu Net, <WD8JJA@arrl.net (R_Davis)
Next by Date:  [Yaesu] Re: Yaesu digest, Vol 1 #84 - 1 msg, <WD8JJA@arrl.net (R_Davis)
Previous by Thread:  [Yaesu] Yaesu Net, <WD8JJA@arrl.net (R_Davis)
Next by Thread:  [Yaesu] Re: Yaesu digest, Vol 1 #84 - 1 msg, <WD8JJA@arrl.net (R_Davis)
Indexes:  [Date] [Thread] [Top] [All Lists]