Back in Nov 1999, KC0DBY posted a list of such data. I will copy it and add
it below.
Bill-W4BSG
At 02:32 AM 1/30/01 -0500, you wrote:
>Hello to all,Has anyone ever seen anything listed as far as hidden menu for
>Yaesu FT-920 thanks Rick
>
>
>Moderator: Ray Brown, KB0STN
>owner-yaesu@qth.net
>---
>Submissions yaesu@qth.net
>
>
>Reply-To: Chris Buckley - KC0DBY <cwbuckle@mtu.edu>
>
>
>In hopes of extracting some useful information from QRZ, I downloaded some
>mods for european radios, and after a little bit of hacking around, found
>the following to work quite well for my FT-920.
>
>FT-920 MARS modification.
>
>1. Turn on the radio while holding down the [step] and [lock] keys.
>2. Enter the password "0761161" into the keypad, and press [enter]
>3. Enter the menu system. Beyond U-73 there will be a new set of "F"
>menus, some of which are used for display purposes (such as the serial
>number of the radio, and version numbers of various guts) One of the
>menus is F-33 and is labeled Destina, apparently meant for the shipping
>destination of the radio.
>4. Switch the destination to "Std"
>
>This enables transmission on the MARS bands on the radio, but not on
>the general coverage receive bands. (meaning you will be able to TX
>on any frequency where (GEN) is not displayed next to the mode)
>
>Other various menus are listed below, and while I have not verified
>there use, but here is what I interpret them to mean, and their defaults,
>at least on my radio:
>
>F-01 01.16 CPU Version
>F-02 1.29 DSP Version
>F-03 FIN01.26 Tuner Version
>F-04 OFF Tuner Clear
>F-05 OFF Tuner Plate Adjustment
>F-06 OFF Tuner Write to Tuner Memory
>F-07 OFF Tuner Movement
>F-09 237 AM Modulation (Not in % I hope!)
>F-10 133 IF Shift Center Frequency (Possibly Useful)
>F-11 67 SSB Squelch
>F-12 133 FM Squelch
>F-13 72 TX Gain 160M
>F-14 63 TX Gain 80M
>F-15 55 TX Gain 40M
>F-16 53 TX Gain 30M
>F-17 60 TX Gain 20M
>F-18 69 TX Gain 17M
>F-19 58 TX Gain 15M
>F-20 51 TX Gain 12M
>F-21 56 TX Gain 28Mhz
>F-22 53 TX Gain 50Mhz
>F-23 TESTOFF Testing TX Power
>F-24 187 ENC-NDV CTCSS encoder narrow deviation
>F-25 168 ENC-WDV CTCSS encoder wide deviation
>F-26 207 DTMFDEV Dual Tone deviation
>F-27 0.037 LSB REC CALL (????)
>F-28 0.037 LSB TX CALL (????)
>F-29 0.000 LSB Processor
>F-30 0.003 USB REC CALL (????)
>F-31 0.003 USB TX CALL (????)
>F-32 0.000 USB Processor
>F-33 USA Shipping Destination
>F-34 OFF Japanese 20W Transmitter limitation.
>F-35 XXXXXXX Serial Number
>
>
>I haven't found any information on further modification of the US
>version 920. If anyone has any, please let me know. I would really
>like to get a nice compilation of extra documentation for this rig,
>and really don't want to actually fork over the $$ for the service
>manual...
>
>Thanks,
>
>Chris
>---- ---- ---- ---- ---- ----
>Chris Buckley -- KC0DBY
>
-
Bill Aycock --- Persimmon Hill
Woodville, Alabama, US 35776
(in the N.E. corner of the State)
W4BSG -- Grid EM64vr
baycock@HiWAAY.net
w4bsg@arrl.net
--
FAQ on WWW: http://www.contesting.com/FAQ/yaesu
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
|