[Yaesu] MArrying KAM to FT-920

[Nate Bargmann <n0nb@networksplus.net> (Nate Bargmann)]

Well, folks, as usually happens, I think I figured out the issue
after pressing the panic button.  I wound up setting menu U-46
in the FT-920 to 1700-L, am using the Data-USB mode selection,
am feeding the radio using the data jack on the rear and am
using AFSK.  In the KAM I made sure the MARk and SPace parameters
were set to default (1600 and 1800 repesctively) and set SHift
to MODEM.  I just had a nice QSO with a station in MA, so I'd say
it's working.

Thanks to those who replied.

73, de Nate >>

-- 
 Wireless | Amateur Radio Station N0NB          | "None can love freedom
 Internet | n0nb@networksplus.net               | heartily, but good
 Location | Wichita, Kansas USA EM17hs          | men; the rest love not
   Wichita area exams; ham radio; Linux info @  | freedom, but license."
             http://www.qsl.net/n0nb/           | -- John Milton

--
FAQ on WWW:               http://www.contesting.com/FAQ/yaesu
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com