Hi Jack, Bruce, Jim & all,
Well the problem with the Yaesu G-800S rotor, where the pointer on the
control
box moved 20 degrees every time the 2M packet radio transmitted, has
been
solved!
I tried most of the suggestions that were tossed out and thanks for all
those
ideas. Couldn't really separate the leads coming down the tower, as
everything
is on a hazer and the cables come down a follower line. I tried the
torids, no
difference. I tried the caps on the control leads to ground, no
difference. I
redid all the grounds in the shack and it helped a little.
Then I tried the simplest thing, I removed the ground on the 110 line to
the
rotor power line and, bingo no more movement when the 2M transmitted.
Go
figure!
73 - Ted - W8TTS
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|