I have had my FT920 for about 1 1/2 years. Extremely
satisfied with it. The receiver is very hot and the noise
blanker is outstanding. Puts out an honest 100 watts. Never
regreted buying it
.
Lou, K1RAK
-----Original Message-----
From: Yaesu Digest <owner-yaesu-digest@contesting.com>
To: yaesu-digest@contesting.com
<yaesu-digest@contesting.com>
To: <yaesu@contesting.com>
Date: Wednesday, March 17, 1999 11:53 PM
Subject: Yaesu Digest V2 #42
>
>Yaesu Digest Wednesday, March 17 1999
Volume 02 : Number 042
>
>
>
>In this issue:
>
> [Yaesu] 6M and 2M Xverters for FT1000D
> Re: [Yaesu] 6M and 2M Xverters for FT1000D
> [Yaesu] FT5200 Rot. Enc. Pblm
> [Yaesu] Ft-980
> [Yaesu] FT-920
>
>See the end of the digest for information about
yaesu-digest
>
>-----------------------------------------------------------
-----------
>
To: <yaesu@contesting.com>
>Date: Wed, 17 Mar 1999 09:39:15 -0500 (EST)
>From: ryansci@InfoAve.Net (Stephen Reichlyn)
>Subject: [Yaesu] 6M and 2M Xverters for FT1000D
>
>Can anyone suggest a commercial source for a transceiving
transverter for 6M
>and/or 2M that will work with an FT1000D? Thanks.
>73, Steve AA4V
>
>------------------------------
>
To: <yaesu@contesting.com>
>Date: Wed, 17 Mar 1999 10:49:14 -0500
>From: Dave Jordan <wa3gin@erols.com>
>Subject: Re: [Yaesu] 6M and 2M Xverters for FT1000D
>
>TENTEC
>- -----------
>
>Stephen Reichlyn wrote:
>
>> Can anyone suggest a commercial source for a transceiving
transverter for 6M
>> and/or 2M that will work with an FT1000D? Thanks.
>> 73, Steve AA4V
>>
>> --
>> FAQ on WWW:
http://www.qsl.net/k7on/yaesu.html
>> Submissions: yaesu@contesting.com
>> Administrative requests: yaesu-REQUEST@contesting.com
>> Problems: owner-yaesu@contesting.com
>> Search:
http://www.contesting.com/km9p/search.htm
>
>------------------------------
>
To: <yaesu@contesting.com>
>Date: Wed, 17 Mar 1999 17:48:57 -0700
>From: Dean Norris <dnorris@k7no.com>
>Subject: [Yaesu] FT5200 Rot. Enc. Pblm
>
>I have a 6 year old FT5200 duo-bander. The dial rotation
does not function
>properly when cold. When set to VFO, it will skip, jump
and tune the
>opposite from the directioon turned. Same when in the
Memory mode. It
>will jump from Mem 1 to 2, back to 1, to 3 . etc blah,
blah. You get the
>drift. Is there an adjustment or other common fix? Should
I send it to
>the fine folk in Calif. Suggestions, please.
>
>Thanks in advance.
>
>Dean
>
>
> Dean Norris, K7NO - email to:
dnorris@k7no.com
> My hat is off to the guy that decided to put
the telephone
> directory in alphabetical order.
>
>------------------------------
>
To: <yaesu@contesting.com>
>Date: Wed, 17 Mar 1999 21:28:33 -0500
>From: Dave Jordan <wa3gin@erols.com>
>Subject: [Yaesu] Ft-980
>
>Hi Folks,
>
>Wondering if anyone on the reflector has a FT-980. I have a
friend who
>has
>one and has lost all sensitivity on the unit.
>
>thanks,
>dave
>
>------------------------------
>
To: <yaesu@contesting.com>
>Date: Wed, 17 Mar 1999 20:57:20 -0600
>From: Bill Aycock <baycock@hiwaay.net>
>Subject: [Yaesu] FT-920
>
>In an infrequent visit to a Ham-Goodies store- I saw and
played with an
>FT-920. I liked it.
>
>I am not a contester, but could become one, someday- Mostly
just casual DX
>and like good, but not exorbitant gear.
>
>I would like any opinion, good or bad- if you would care to
share. I have
>read the Oct 97 QST review.
>
>Bill- W4BSG
>- -
>Bill Aycock W4BSG
>Jackson County, AL
>EM64vr
>W4BSG is "vanity" this time, but was
>earned by exam in 1954, the first time.
>
>------------------------------
>
>End of Yaesu Digest V2 #42
>**************************
>
>
>--
>FAQ on WWW:
http://www.primenet.com/~ke7gh/yaesu.html
>Submissions: yaesu@contesting.com
>Administrative requests:
yaesu-digest-REQUEST@contesting.com
>Problems: owner-yaesu-digest@contesting.com
>
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|