What happens if you engage the auto tuner with the radio connected to a
50 ohm load?
Dave...
WA0ZZG
Andrew wrote:
> I have an ft-900 and the thing is when I am on 80M, it will not auto tune
> with the built in tuner. It says the swr is too high. But if I just hit the
> MOX it goes out fine and swr is only 1.4 or so. What is up with that??
> Any help appreciated.
> ============================================================================
> =
> [][][][][][] [][][][][]
> [] [] Amateur Radio Station VE1VVV
> [] []
> [] [] Andrew Eaton
> [] [][][][]
> [] [] Newport Corner, Nova Scotia, CANADA
> [] []
> [] [] CQ Zone 05 ITU Zone 09
> [] [][][][][]
> ============================================================================
> =
>
> --
> FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
> Submissions: yaesu@contesting.com
> Administrative requests: yaesu-REQUEST@contesting.com
> Problems: owner-yaesu@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|