I have the FT5200 and have been in MUCH colder area's with it
including AZ at 60F and have never had a problem like this.
Sounds like an electrical problem [but you never 'really' know
till ya fix it]. Although, 60F is quite unusual to be a temp
problem.
> When my FT5200 is cool (less than 60 in Arizona), the tuning encoder
> action is not stable. Sometimes it either stays on freq or jumps forward
> then backward, etc. Seems to be better when it warms up. Is there an
> adjustment, either mechanical or electrical that can alter this?
Good luck.
Bill wb7qfo
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|