Eric and the list:
SSB 8 pole filters with bandwidths of 2.1 and 1.8 kHz can be used to
replace the OEM filter in the 920. These filters are installed on a small
adapter board which fits into the holes vacated after the OEM filter is
removed.
Typical measured performance is as follows:
Filter -6 dB -60 dB
OEM 2450 Hz 4300 Hz
#709 2125 Hz 3225 Hz
#711 1875 Hz 2825 Hz
International Radio can be reached via-
email inrad@rosenet.net
fone 541 459 5623
fax 541 459 5632
The web site is- www.qth.com/inrad
Questions can also be referred to me at this mbx.
George
w2vjn@rosenet.net
----------
> From: Eric N Boe <enboe@juno.com>
> To: Yaesu@contesting.com
> Subject: [Yaesu] INRAD filters for FT920
To: <yaesu@contesting.com>
> Date: Monday, August 17, 1998 8:36 PM
>
>
> I've read a couple of articles that mention INRAD filters for SSB that
> are compatible with the Yaesu FT920. Could someone go into detail on:
> 1. Sources
> 2. Cost
> 3. Installation
> 4. Bandwidths available
> 5. Performance
>
> I find myself wishing I had better filtering for my 920, although it's a
> solid rig otherwise. Thanks.
>
> Eric
>
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|